- Uluslararası hakemli dergilerde yayınlanan makaleler
-
KELEŞOĞLU ERGÜN,ERARSLAN YAMAN,ÖZER GÖKHAN (2009). Deformation Character of the Aluminum Alloy AA 6063 Depending on the Homogenization State. Materials Testing, 51(6), 390394., Doi: 10.3139/120.110048 (Yayın No: 5004081)
-
ÖZER GÖKHAN,GÜLER KEREM ALTUĞ,TAŞLIÇUKUR ÖZTÜRK ZEYNEP (2010). Cellular Aluminium Foam Metal Production with Space Holder Particles. Materials Testing, 52(6), 379-382., Doi: 10.3139/120.110140 (Yayın No: 5004089)
-
GÜLER KEREM ALTUĞ,TAŞLIÇUKUR ÖZTÜRK ZEYNEP,ÖZER GÖKHAN (2011). Production of Open Cell Aluminium Metal Foam with Lost Foam Technique. Materials Testing, 53(5), 295-297. (Yayın No: 5004098)
-
GÜLER KEREM ALTUĞ,TAŞLIÇUKUR ÖZTÜRK ZEYNEP,ÖZER GÖKHAN (2011). Expanded polystyrene (EPS) pattern application in investment casting and chemical removing. Ceramic Materials, 63(1), 138-142. (Yayın No: 5004183)
-
ÖZER GÖKHAN,GÜLER KEREM ALTUĞ,LUŞ HÜSEYİN MURAT (2012). Effects of Squeeze Pressure on Microstructure, Porosity and Hardness of an In-Situ Mg2Si/Al-Si-Cu Composite. Materials Testing, 54(1), 26-29., Doi: 10.3139/120.110293 (Yayın No: 5004137)
-
ÖZER GÖKHAN,Burgucu Sarp,Marşoğlu Müzeyyen (2012). A Study on the Recycling of Aluminium Alloy 7075 Scrap. Materials Testing, 54(3), 175-178. (Yayın No: 5004136)
-
ÖZER GÖKHAN,YÜKSEL ÇAĞLAR,CÖMERT ZEKERİYA YAŞAR,GÜLER KEREM ALTUĞ (2013). The Effects of Process Parameters on the Recycling Efficiency of Used Aluminium Beverage Cans (UBCs). Materials Testing, 55(5), 396-400., Doi: 10.3139/120.110448 (Yayın No: 5004138)
-
LUŞ HÜSEYİN MURAT,ÖZER GÖKHAN,GÜLER KEREM ALTUĞ,ERZİ ERAY,DIŞPINAR DERYA (2015). Wear properties of squeeze cast in situ Mg2Si-A380 alloy. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 28(1), 59-64., Doi: 10.1179/1743133614Y.0000000131 (Yayın No: 5004141)
-
ÖZER GÖKHAN,KARAASLAN AHMET (2017). The Effect of RRA Heat Treatment on the Intergranular Corrosion (IGC) of the AA7075 Alloy. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 54(4), 256-266., Doi: 10.3139/147.110453 (Yayın No: 5004145)
-
ÖZER GÖKHAN,KARAASLAN AHMET (2017). Relationship of RRA heat treatment with exfoliation corrosion, electrical conductivity and microstructure of AA7075 alloy. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 68(11), 1260-1267., Doi: 10.1002/maco.
-
ÖZER GÖKHAN,KARAASLAN AHMET (2017). Properties of AA7075 aluminum alloy in aging and retrogression and reaging process. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 27(11), 2357-2362., Doi: 10.1016/S1003-6326(17)60261-9 (Yayın No: 5004143)
-
ÖTER ZAFER ÇAĞATAY,COŞKUN MERT,AKÇA YAŞAR,SÜRMEN ÖMER,YILMAZ MUSTAFA SAFA,ÖZER GÖKHAN,TARAKÇI GÜRKAN,KHAN HAMAID MAHMOOD,KOÇ EBUBEKİR (2019). Support optimization for overhanging parts in direct metal laser sintering. OPTIK, 181, 575-581., Doi: 10.1016/j.ijleo.2018.12.072 (Yayın No: 5104553)
-
ÖTER ZAFER ÇAĞATAY,Coşkun Mert,Akça Yaşar,Sürmen Ömer,YILMAZ MUSTAFA SAFA,ÖZER GÖKHAN,Tarakçı Gürkan,KOÇ EBUBEKİR (2019). Benefits of laser beam based additive manufacturing in die production. OPTIK, 176(null), 175-184., Doi: 10.1016/j.ijleo.2018.09.079 (Yayın No: 5004153)
-
ÖZER GÖKHAN,KARAASLAN AHMET (2019). Effects of RRA heat treatment on the exfoliation corrosion (EXCO), intergranular corrosion (IGC), and electrical conductivity of AA7075 alloy. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 70(3), 549-557., Doi: 10.1002/maco.201810436 (Yayın No: 5004155)
-
ÖZER GÖKHAN,GECÜ RIDVAN,KARAASLAN AHMET (2019). The effect of retrogression and re- aging treatment on mechanical and tribological features of AA7075 aluminium alloyEinfluss der Retrogressions- und Reaging-Behandlung auf die mechanischen und tribologischen Eigenschaften der Aluminiumlegierung AA7075. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 50(6), 761-768., Doi: 10.1002/mawe.201800056 (Yayın No: 5121508)
-
ÖZER GÖKHAN,Kaya Isik,KARAASLAN AHMET (2019). Effects of retrogression and reaging heat treatment on the microstructure, exfoliation corrosion, electrical conductivity, and mechanical properties of AA7050. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 70(10), 1788-1797., Doi: 10.1002/maco.201910887 (Yayın No: 5367278)
-
GÜLER KEREM ALTUĞ,KISASÖZ ALPTEKİN,ÖZER GÖKHAN,KARAASLAN AHMET (2019). Cooling slope casting of AA7075 alloy combined with reheating and thixoforging. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 29(11), 2237-2244., Doi: 10.1016/S10036326(19)65129-0 (Yayın No: 6069381)
-
KISASÖZ ALPTEKİN,ÖZER GÖKHAN,KARAASLAN AHMET (2019). Effect of secondary phases on 475 degrees C embrittlement of 1.4462 and 1.4501 duplex stainless steels at short-term heat treatment conditions. MATERIALS RESEARCH EXPRESS, 6(11), Doi: 10.1088/2053-1591/ab4b38 (Yayın No: 6069396)
-
ÖZER GÖKHAN,KARAASLAN AHMET (2019). Effect of RRA heat treatment on corrosion and mechanical properties of AA7075. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 70(11), 2064-2072., Doi: 10.1002/maco.201910955 (Yayın No: 5503839)
-
Yalçıner Gülüzar,ÖZER GÖKHAN,KISASÖZ ALPTEKİN,KARAASLAN AHMET (2019). Influence of the phase balance and cooling conditions on the microstructure and corrosion behavior of solutiontreated 1.4462 duplex stainless steel. MATERIALS RESEARCH EXPRESS, 6(12), 1-9., Doi: 10.1088/2053-1591/ab6f3a (Yayın No: 6114165)
-
ÖZER GÖKHAN,KISASÖZ ALPTEKİN,KARAASLAN AHMET (2019). Investigation of the relationship between intergranular corrosion and retrogression and reaging in the AA6063. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 70(12), 2256-2265., Doi: 10.1002/maco.201911100 (Yayın No: 6069378)
-
ÖZER GÖKHAN,Tarakçı Gürkan,YILMAZ MUSTAFA SAFA,ÖTER ZAFER ÇAĞATAY,Sürmen Ömer,Akça Yaşar,Coşkun Mert,KOÇ EBUBEKİR (2020). Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 71(3), 365373., Doi: 10.1002/maco.201911171 (Yayın No: 6215692)
-
ÖZER GÖKHAN,ÖTER ZAFER ÇAĞATAY,YILMAZ MUSTAFA SAFA,KOÇ EBUBEKİR,ACAR SERHAT,GÜLER KEREM ALTUĞ (2020). Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC). INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 33, 146-152., Doi: 10.1080/13640461.2020.1773053 (Yayın No: 6395069)
-
ÖZER GÖKHAN,KARAASLAN AHMET (2020). A Study on the Effects of Different Heat-Treatment Parameters on Microstructure-Mechanical Properties and Corrosion Behavior of Maraging Steel Produced by Direct Metal Laser Sintering. STEEL RESEARCH INTERNATIONAL, 91(10), Doi: 10.1002/srin.202000195 (Yayın No: 6669836)
-
ERTÜRK ALPAY TAMER, Mustafa Enes Bulduk, TARAKÇI GÜRKAN, ÖZER GÖKHAN, YARAR ESER (2021). Investigation of the Microstructure and Mechanical Characteristics of Lattice Structures Produced by Laser Powder Bed Fusion Method. Metals and Materials International, 28(1), 155167., Doi: 10.1007/s12540-021-01038-y (Yayın No: 7190605)
-
YILMAZ MUSTAFA SAFA, ÖZER GÖKHAN, ŞAHİN ORHAN, KARAASLAN AHMET (2021). INVESTIGATION OF THE EFFECTS OF DIFFERENT RETROGRESSION AND RE-AGING PARAMETERS APPLIED TO THE 7075 ALLOY ON THE MICRO-ARC OXIDATION PROCESS. Surface Review and Letters, 28(9), 1-6., Doi: 10.1142/S0218625X21500785 (Yayın No: 7190591)
-
KHAN HAMAID MAHMOOD, ÖZER GÖKHAN, TARAKÇI GÜRKAN, COŞKUN MERT, KOÇ EBUBEKİR, KAYNAK YUSUF (2021). The impact of aging and drag finishing on the surface integrity and corrosion behavior of the selective laser melted maraging steel samples. Materialwissenschaft und Werkstofftechnik, 52(1), 60-73., Doi: 10.1002/mawe.202000139 (Yayın No: 6911266)
-
YILMAZ MUSTAFA SAFA,ÖZER GÖKHAN,ŞAHİN ORHAN,KARAASLAN AHMET (2021). Micro Arc Oxidation Coating Parameter Property Relationship. MATERIALS PERFORMANCE, 60(1), 40-44. (Yayın No: 6825604)
-
YILMAZ MUSTAFA SAFA, ÖZER GÖKHAN, ÖTER ZAFER ÇAĞATAY, ERTUĞRUL ONUR (2021). Effects of hot isostatic pressing and heat treatments on structural and corrosion properties of direct metal laser sintered parts. Rapid Prototyping Journal, 27(5), 1059-1067., Doi: 10.1108/RPJ-10-2020-0245 (Yayın No: 7104196)
-
ÇALIŞKAN CEMAL İRFAN, ÖZER GÖKHAN, COŞKUN MERT, KOÇ EBUBEKİR (2021). Investigation of direct metal laser sintering downskin parameters sagging effect on microchannels. The International Journal of Advanced Manufacturing Technology, 114, 2567-2575., Doi: 10.1007/s00170-021-07057-8 (Yayın No: 7097480)
-
Çalışkan Cemal İrfan, COŞKUN MERT, ÖZER GÖKHAN, KOÇ EBUBEKİR, VURKIR Turgut Azer, YÖNDEM Gökay (2021). Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering. The International Journal of Advanced Manufacturing Technology, 117, 3805-3817., Doi: 10.1007/s00170-021-07928-0 (Yayın No: 7190598)
-
Çalışkan Cemal İrfan, ÖZER GÖKHAN, KOÇ EBUBEKİR, Sarıtaş Umur Sezer, Yıldız Coşkun Fırat, Çiçek Övgü Yağız (2022). Efficiency Research of Conformal Channel Geometries Produced by Additive Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive Industry. 3D Printing and Additive Manufacturing, Doi: 10.1089/3dp.2021.0062 (Yayın No: 7376448)
-
Mustafa Enes Bulduk, Çalışkan Cemal İrfan, COŞKUN MERT, ÖZER GÖKHAN, KOÇ EBUBEKİR (2022). Comparison of the effect of different topological designs and process parameters on mechanical strength in gears. The International Journal of Advanced Manufacturing Technology, Doi: 10.1007/s00170-021-08405-4 (Yayın No: 7543173)
-
KHAN HAMAID MAHMOOD, ÖZER GÖKHAN, YILMAZ MUSTAFA SAFA, KOÇ EBUBEKİR (2022). Corrosion of Additively Manufactured Metallic Components: A Review. Arabian Journal for Science and Engineering, Doi: 10.1007/s13369-021-06481-y (Yayın No: 7544302)
-
KHAN HAMAID MAHMOOD, ÖZER GÖKHAN, YILMAZ MUSTAFA SAFA, TARAKÇI GÜRKAN (2022). Improvement of corrosion resistance of maraging steel manufactured by selective laser melting through Intercritical heat-treatment. Corrosion, Doi: 10.5006/3972 (Yayın No: 7521045)
-
ÖZER GÖKHAN, KHAN HAMAID MAHMOOD, TARAKÇI GÜRKAN, YILMAZ MUSTAFA SAFA, YAMAN PAŞA, KARABEYOĞLU SENCER SÜREYYA, KISASÖZ ALPTEKİN (2022). Effect of heat treatments on the microstructure and wear behaviour of a selective laser melted maraging steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Doi: 10.1177/09544089221093994 (Yayın No: 7669095)
-
ÖZER GÖKHAN (2022). Investigation of Inhibitory Effects of Chitosan on Pitting and Electrochemical Corrosion Behavior Caused by Sigma Phase in Duplex Stainless Steels (DSS). Protection of Metals and Physical Chemistry of Surfaces, 58(1), 176-189., Doi: 10.1134/S2070205122010154 (Yayın No: 7588206)
-
KHAN HAMAID MAHMOOD, ÖZER GÖKHAN, YILMAZ MUSTAFA SAFA, KOÇ EBUBEKİR (2022). Corrosion of Additively Manufactured Metallic Components: A Review. Arabian Journal for Science and Engineering, 47, 5465-5490., Doi: 10.1007/s13369-021-06481-y (Yayın No: 7544302)
-
COŞKUN MERT, DİZDAR KEREM CAN, TARAKÇI GÜRKAN, ÖZER GÖKHAN, DIŞPINAR DERYA (2022). Recycling of additive manufactured AlSi10Mg and its effect on mechanical properties. Materials Chemistry and Physics, Doi: 10.1016/j.matchemphys.2022.126411 (Yayın No: 7712570)
-
ÖZER GÖKHAN, KISASÖZ ALPTEKİN (2022). The role of heat treatments on wear behaviour of 316L stainless steel produced by additive manufacturing. Materials Letters, 327, 133014, Doi: 10.1016/j.matlet.2022.133014 (Yayın No: 7768297)
-
TARAKÇI GÜRKAN, KHAN HAMAID MAHMOOD, YILMAZ MUSTAFA SAFA, ÖZER GÖKHAN (2022). Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior. Rapid Prototyping Journal, 28(8), 1609-1621., Doi: 10.1108/RPJ-11-2021-0325 (Yayın No: 7668828)
-
ÖZER GÖKHAN (2022). Heat Treatment, Microstructure and Corrosion Relationship on 316L SS Produced by AM. Materials Science and Technology, 39(6), 671-682., Doi: 10.1080/02670836.2022.2131242 (Yayın No: 7850195)
-
ÇALIŞKAN CEMAL İRFAN, KHAN HAMAID MAHMOOD, ÖZER GÖKHAN, Waqar Saad, Tütük İbrahim (2022). The effect of conformal cooling channels on welding process in parts produced by additive manufacturing, laser powder bed fusion. Journal of Manufacturing Processes, 83, 705-716., Doi: 10.1016/j.jmapro.2022.09.036 (Yayın No: 7819094)
-
ERTÜRK ALPAY TAMER, YARAR ESER, ÖZER GÖKHAN, Mustafa Enes Bulduk (2023). Post-process drilling of AlSi10Mg parts by laser powder bed fusion. The International Journal of Advanced Manufacturing Technology, Doi: 10.1007/s00170-023-11170-1 (Yayın No: 8246345)
-
ÖZTÜRK KÜBİLAY, KISASÖZ ALPTEKİN, ÖZER GÖKHAN, KARAASLAN AHMET (2023). Precipitation of carbides in a nickel-based cast heat-resistant alloy during thermal exposure: evolution of microstructure, hardness and corrosion properties. Materials Testing, 65(2), 233-243., Doi: 10.1515/mt-2022-0243 (Yayın No: 8216670)
-
Birsen Dilara, Tütük İbrahim, ACAR SERHAT, KARABEYOĞLU SENCER SÜREYYA, ÖZER GÖKHAN, GÜLER KEREM ALTUĞ (2023). Microstructure and wear characteristics of hybrid reinforced (ex-situ SiC–in-situ Mg2Si) Al matrix composites produced by vacuum infiltration method. Materials Chemistry and Physics, 302, 127743, Doi: 10.1016/j.matchemphys.2023.127743 (Yayın No: 8313811)
-
ÇALIŞKAN CEMAL İRFAN, KOCA ALİİHSAN, ÖZER GÖKHAN, AKBAL ÖMER, Bakır Soner (2023). Efficiency comparison of conformal cooling channels produced by additive and subtractive manufacturing in automotive industry plastic injection moulds: a hybrid application. The International Journal of Advanced Manufacturing Technology, Doi: 10.1007/s00170-023-11389-y (Yayın No: 8321935)
-
Çalışkan Cemal İrfan, ÖZER GÖKHAN, KOÇ EBUBEKİR, Sarıtaş Umur Sezer, Yıldız Coşkun Fırat, Çiçek Övgü Yağız (2023). Efficiency Research of Conformal Channel Geometries Produced by Additive Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive Industry. 3D Printing and Additive Manufacturing, 10(2), 213-225., Doi: 10.1089/3dp.2021.0062 (Yayın No: 7376448)
-
ÇALIŞKAN CEMAL İRFAN, ÖZER GÖKHAN, BULDUK Mustafa Enes, SARITAŞ UMUT SEZER (2023). Recycling of Laser Powder Bed Fusion Scraps in Conventional Plastic Injection Systems. Journal of Polymers and the Environment, Doi: 10.1007/s10924-023-02997-6 (Yayın No: 8411408)
- Ulusal hakemli dergilerde yayınlanan makaleler
-
ÖZER GÖKHAN (2020). Eklemeli Üretim Teknolojileri Üzerine Bir Derleme. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 9(1), 606-621. (Kontrol No: 6036807)
-
ÖZER GÖKHAN (2021). 1.4462 (AISI 2205) DUBLEKS PASLANMAZ ÇELİKTE ISIL İŞLEM KOŞULLARININ FAZ DEĞİŞİMİ, SERTLİK VE KOROZYON DAVRANIŞI ÜZERİNE ETKİLERİNİN İNCELENMESİ. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 10(1), 426-431., Doi: https://doi.org/10.28948/ngumuh.806495 (Kontrol No: 6890233)
-
ÖZER GÖKHAN, ACAR SERHAT, KISASÖZ ALPTEKİN, GÜLER KEREM ALTUĞ (2021). A study on the addition of titanium to liquid aluminum by using turning chips. GAZI UNIVERSITY JOURNAL OF SCIENCE, Doi: 10.35378/gujs.819612 (Kontrol No: 6982696)
- Diger Makaleler